SME-65L Lipstick Machine

Process Flow:
a.Water,oil and others ,heated and mixed in Liquid Pot and Oil Pot.
b.Materials ,Sucked into emulsifying pot by vacuum system
c.Stirred by both the center blade and side scraper. Then cut off in cut-off mixing unit,all in the Emulsifying Pot.
d.The materials are finally crushed into small pellets of 200um~2um.
e.The finished product , pumed out from Discharge System

Features:
a.Cover can be lifted up-down by lifting system
b.With wheels,movable
c.The bubbles (generated during stirring and mixing process), sucked out from material,because of Vacuum Effect
d.Machine Materials,ss304.And ss316 or ss316L according to the requirement of Corrosion Resistance

Work principle

After heating & mixing the materials in the water boiler and oil boiler, inhalated it into the emulsification boiler by the vacuum pump, make it mix and downflow to the homogenizer by birdirection cutting, compression and folding of the scraping mixing box and center impeller. The high tangential speed caused by high-speed rotating rotor and the strong momentum caused by high-frequency mechanical effect make material in the narrow gap between stator and rotor get a strong mechanical and hydraulic shear , centrifugal extrusion, liquid layer friction, impacted tear ,turbulence ect, so the pelletizing, emulsification, mixing, equalization, spread of the material will be finished in a short time. In the corresponding role of mature technology ,immiscible solid phase, liquid and gas are instantaneously uniformly emulsified ,finally get steady high-quality products.
Emulsification pot can be a vacuum, bleeds away bubbles in mixing the material.
Machine parts in contact with materials are made of high quality SUS316L material, withthe inner surface mirror polished, vacuum mixing device is clean and measures the GMP health standards.

Machine Type	Emulsifier
Product Type	Cosmetic
Vacuum	Optional
Lifting	Electrical or Hydraulic
Product Keywords	Lipstick Vacuum emulsifying mixer

Technical Parameter:

Emulsifying pot	Design Volume(L)	30/50	100/150/200
	Capacity(L)	25/40	80/120/160
	Scraper Stirring Power(kw)	0.75/1.1	1.1/1.1/2.2
	Scraper Stirring Speed(rpm)	0-86	0-86
	Homogenizer power(kw)	1.1/1.5	3
	Electrical heating power(kw)	2	6/6/8
	Homogenizer speed (rpm)	2800	2800
Water pot	Design Volume(L)	25/38	60/100/120
	Capacity(L)	20/30	45/80/95
	Stirring power(kw)	0.55	0.55/0.55/0.75
	Stirring speed(rpm)	1400	1400/1400/960
	Electrical heating power(kw)	2	4/6/8
Oil pot	Design Volume (L)	20/25	45/75/100
	Capacity (L)	16/20	35/60/80
	Stirring power (kw)	0.55	0.55/0.55/0.75
	Stirring speed (rpm)	1400	1400/1400/960
	Electrical heating power (kw)	2	4/6/8